Cart 0
Hobbywing XRotor Micro Cube FC & 40A 4in1 ESC (BLHeli-S DShot600) - RC Papa

Hobbywing XRotor Micro Cube FC & 40A 4in1 ESC (BLHeli-S DShot600)


Flight Controller
It´s easy to wire and install when pairing the FC with a 4-in-1 ESC an image transmission device. It supports the Betaflight/Cleanflight firmware, users can adjust various parameters via the Betaflight/Cleanflight software.

The XRotor Micro Flight Controller F4 which supports Dshot high-speed digital throttle signals includes an OSC microchip and supports TF-card insertion which can save more flight data to make users adjust their aircraft easily.

ESC
4IN1 ESC w/BEC - Super Small & Light architecture

BLHeli-S Firmware Ready- The ESC (with great performance and rich functions) uses the original BLHeli-S firmware and supports adjusting parameters or upgrading firmware via different methods (i.e. via throttle signal wire with using other development board or a FC flashed with the cleanfight/betaflight firmware

Supports regular throttle signals (with the frequency of up to 621Hz), Oneshot125 (125-250us) high-speed throttle signals (with the real-time frequency of up to 3.8KHz), also Oneshot42 (42-81us) and Multishot (2-25us) super High-speed throttle signals. All this makes communication between FC and ESC more agile, throttle linearity smoother, and throttle response extremely fast

DEO Technology/Active Freewheeling

The DEO (Driving Efficiency Optimization) technology implemented in the ESC has multiple advantages:

Active braking. When reducing the throttle amount, the motor will decelerate very quickly. This feature enables pilots to more easily perform all maneuvers like sharp turns, altitude changes, and sudden braking.

Higher driving efficiency, longer flight time.

Lower ESC temperature and a more reliable operation

ESC Spec 
Model XRotor Micro 40A 4in1 BLHeli-S DShot600
SKU 30901076
Application FPVs with 130-280mm Diagonal Wheelbase
LiPo Power input 2S-5S
Cont.Current 40Ax4
Burst Current 50Ax4
BEC Output 5V & 1.5A
Input Wires 14AWG-130mm* (Red/Black)
Output Wire No wires but solder tabs
Connectors In XT60 (w/ Wires Soldered on)
Connectors Out no
Weight 10g
Size 42.6x36x4mm
Firmware BLHeli-S A-H-50 16.5
Throttle Calibration Supported
ESC Programming Stick Programming, BLHeliSuite
DEO Supported
OneShot Mode Supported
Timing Supported
Motor Rotation Supported

* Note: All the wire length above is the original length, not the length you see from the outside.


Share this Product


More from this collection

Net Orders Checkout

Item Price Qty Total
Subtotal US$0.00
Shipping
Total

Shipping Address

Shipping Methods