Cart 0
FETtec AIO 35A

FETtec AIO 35A


Features:

FC:

  • Latest STM32G4 Processor

    • 170Mhz + Math accelerator

    • MPU6000

  • Supply voltage 12-25V (3S-6S Lipo voltage)

  • 2x dedicated onboard 5V BEC for VTX (max. 600mA each)

    • 5V BEC for RX

    • 5V/16V BEC for VTX (switchable and real Pit*)

  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 4 pin connector for receiver and VTX

    • Signal, telemetry, 5V, gnd

    • Gnd, 5V, TX1, RX1

  • 5 UART serials

    • UART 1 free

    • UART 2 used for Receiver

    • UART 3 free

    • UART 4 used for onboard OSD, can be set free

    • UART 5 used for ESCs / TLM / Onewire

  • Solder pad for RGB LEDs

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • KISS FC firmware 

*real Pit-Mode: A power supply pin which is remotely switchable 

ESC:

  • Active current limiting @ 35A

  • Input voltage: 3s-6s

  • High quality 40V MOSFETs

  • STM32G071 @ 64MHz

  • up to 128 kHz Motor PWM

  • Full sine wave control
  • Automatic input signal detection

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec ESC firmware

OSD:

  • Onboard OSD

    • Graphic OSD (STM32)

    • Full KISS Tuning

    • Filter (PIDs, Rates, Settings)

    • LED control (RGB LED, Racewire)

    • VTX

    • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)

    • KISS GPS support + live map

    • Custom graphic pilot logo

    • Stick overlay

    • Custom layout

    • can be deactivated for usage of digital systems

  • Connector type: JST-SH-1mm

Dimensions:

 

 dimensionspsqi5eNBtK81J

 

  • Maximum outside dimensions: 30 x 37,5mm

    • Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)

  • Overall height: 7,9mm

  • Weight: 8,9 g

 

Software:

KISS Firmware - Softwareupdate via FETtec Configurator

FETtec ESCs Firmware - Softwareupdate via FETtec Configurator

FETtec OSD - Softwareupdate via FETtec Configurator

 

Scope of delivery: 

1x FETtec AIO 35A

1x Capacitor 50V 470µF

2x 4 pin cable with JST connector on one side

1x 8 pin cable with JST connector on one side

Standoffs


Share this Product


More from this collection

Net Orders Checkout

Item Price Qty Total
Subtotal US$0.00
Shipping
Total

Shipping Address

Shipping Methods