Cart 0
Hobbywing Quicrun WP 1080 G2 2-3S Waterproof Brushed ESC for Rock Crawler

Hobbywing Quicrun WP 1080 G2 2-3S Waterproof Brushed ESC for Rock Crawler


Features

  • Fully Water-proof and dust-proof, suitable for all-weather races.
  • Small in size, with a built-in capacitor module.
  • Four operating modes available (Real Car Operating / FWD with Brake / FWD and REV with Brake / FWD and REV)
  • In the first "real car mode" The direction of the motor is switchable in real time by using the idle channel on the remote control.
  • Real-Time Adjustment of Drag Braking Force.
  • 15 programmable parameter items
  • PWM Frequency: 1K/2K/4K/8K/16K Adjustable
  • Freewheeling (DEO) capability
  • Drag brake rate in 9 levels (adjustable)
  • Electronic switch
  • Aluminum case for great heat dissipation
  • Great current endurance capability. 
  • Great built-in BEC output capacity switchable 6V/ 7.4/ 8.4V
  • Automatic throttle range calibration, easy to use.
  • Multiple protections:
  • Over Voltage Protection
  • Low voltage cut-off protection for battery
  • Over-heating protection
  • Throttle signal loss protection, and much more
  • Risk-Free manufacturer's limited warranty available through Authorized Dealers in North America
  • WP-1080 G2 ESC VS WP-1080 (G1)

    • BEC output can go up to 8.4V
    • Real-Time Adjustment of Drag Braking Force.
    • Real Car Mode
    • New Aluminum case

    Specification: QuicRun Brushed ESC series


    Brushed ESC WP 1080 G2  
    WP 1080 
    WP 1060 
    p/n 30120202 30112750 30120201
    Waterproof Yes Yes Yes
    Dual Mode No No No
    Fwd Cont. / Peak
    Rev Cont. / Peak
    80A / 400A 80A / 400A
    60A / 360A
    Car Applicable 1/10 Rock Crawler 1/8 - 1/10 Rock Crawler and Tank or Boat 1/10 Touring Car, Buggy, Short Course Truck, Monster, Truggy, Rock Crawler and Tank
    Motor Limit Brushed Motors
    540/550 Series
    2S LiPo or 5S NiMH

    3S LiPo or 9S NiMH
    Brushed Motors
    540/550/775 Series
    2S LiPo or 6S NiMH: ≥10T or\RPM<3000@7.4V
     

    3S LiPo or 9S NiMH: ≥16T or RPM<2000@7.4V

    Brushed motor
    540 or 550 series

    2S Lipo or 6 NiMH: T ≥12T or RPM<3000 @7.2V

    3S Lipo or 9 NiMH: T≥18T or RPM< 2000 @7.2V

    Battery 2-3S LiPo or 5-9S NiMH 2-3S LiPo or 5-9S NiMH 2-3S Lipo or 5-9 NiMH
    BEC Output 6V/7.4V/8.4V @ 4A (switch-mode) 6V/7.4V @ 3A 
    (switch mode)
    2A/5V 
    (Linear Mode)
    PWM Frequency Adjustable
    1K/2K/4K/8K/16K
     Adjustable
    1K/2K/4K/8K/16K
    1KHz
    Wires 14AWG-200mm w/ XT60 Connector 14AWG-200mm w/ XT60 Connector 14AWG-200mm w/TAMIYA Connector
    Size/ Weight 37.2(L)* 31.9(W)*18.4(H) (without fan) 36.5(L)* 32(W)*18(H) (without fan) 36.5(L)*32(W)*18(H)
    External Program Port Separate Port 
    Available
    External Program Port 
    Available
    N/A
    Programming LED Program card LED Program card Jumper Cap
    Cooling Fan Without cooling fan  -
    Weight* 70.2g w/ wire and connectors 58.5g 39g

     


       


    Share this Product


    More from this collection

    Net Orders Checkout

    Item Price Qty Total
    Subtotal US$0.00
    Shipping
    Total

    Shipping Address

    Shipping Methods