Cart 0
SkyRC Ultimate Duo 1400W 30A Balance Charger Discharger - RC Papa

SkyRC Ultimate Duo 1400W 30A Balance Charger Discharger

US$216.99

Package Included :

1 x SkyRC 1400W Duo Charger

2 x 2~8S Multiple Balance Board Adapter

2 x Insulated Banana to Xt60 Battery Connector

2 x Charging Cable With Insulated Banana Connector

Specification :

Input Voltage: DC 11-30V

Charge circuit power: 700W x2

Discharge circuit power: 30W x2

Charge current range: 0.1-30.0A

Discharge current range: 0.1-5.0A

Current drain for balancing port: 800mA/cell

Ticket Charging Current: 50mA-300mA & Off

LiPo/LiFe/Lilon cell count: 1-8Cells

NiCd/NiMH battery cell count: 1-20Cells

Pb battery voltage: 2-24V

Dimension: 200x140x55mm

Net weight: 1220g

Features :

Optimized Operating Software

Ultimate Duo 1400W features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user's fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!

Battery Memory (Data Store/Load)

The charger can store up to 10 different charge/discharge profiles in each channel for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.

Terminal Voltage Control(TVC)

The charger allows user to change the end voltage. (for expert user only)

Synchronous Mode

When charging two same batteries, both charging channels can be set by channel one.

PC Control Software Charge Master

The free Charge Master software gives you unparalleled ability to operate the charger through the computer. You can monitor pack voltage, cell voltage and other data during the charging, view charge date in real-time graphs. And you can initiate, control charging and update firmware from Charge Master.

LiHV Mode Available

The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.

Internal Independent Lithium Battery Balancer

Ultimate Duo 1400W employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.

Balancing Individual Cells Battery Discharging

During the process of discharging, Ultimate Duo 1400W can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.

Adaptable to Various Type of Lithium Battery

Ultimate Duo 1400W is adaptable to various types of lithium batteries, such as LiPo, LiIon and the new LiFe and LiHV series of batteries.

Fast and Storage Mode of Lithium Battery

Purposes to charge lithium battery varies, 'fast' charge reduce the duration of charging, whereas 'store' state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.

Cyclic Charging/Discharging

1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery's activity.

Re-Peak Mode of NiMH/NiCd Battery

In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically. This is good for making certain the battery is fully charged.

Delta-peak Sensitivity for NiMH/NiCd

Delta-peak sensitivity for NiMH/NiCd battery: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.

Automatic Charging Current Limit

You can set up the upper limit of the charging current when charging your NiMH or NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.

LiPo Battery Meter

The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage.

Battery Internal Resistance Meter

The user can check each cell's internal resistance.

Capacity Limit

The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.

Temperature Threshold*

The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.

This function is available by connecting optional temperature probe, which is not included * in the package.

Processing Time Limit

You can also limit the maximum process time to avoid any possible defect.


Share this Product


More from this collection